Case study · Metals & fabrication

Florida job shop cuts part programming from an hour to minutes with CAM Assist

The 14-machine job shop's programming was a bottleneck even with several Fusion seats; manual programming took 45 minutes to an hour per part and new staff faced a steep learning curve.

Manufacturer
Total Manufacturing Solutions
Use cases
1
Evidence
Vendor-reported
Year
2025

Vendor-reported  This result comes from a vendor's case study. Treat figures as claims until you can confirm them with the manufacturer or in a pilot of your own.

The challenge

The 14-machine job shop's programming was a bottleneck even with several Fusion seats; manual programming took 45 minutes to an hour per part and new staff faced a steep learning curve.

The approach

The shop added CloudNC's CAM Assist inside Autodesk Fusion, later using 3+2-axis support and Cutting Parameters AI for feeds and speeds.

1 use case in this implementation

  1. AI-assisted CNC / CAM programming

    AI generates CNC toolpaths and cutting parameters inside Autodesk Fusion.

    • I could pump out the programs in 5-10 minutes.
    • 80% of the work in the background in a matter of minutes

Outcomes as reported by the source. We do not adjust, combine or extrapolate reported figures.

Related case studies

Put AI to work

Find the AI opportunities hiding in your plant.

Genvo, our implementation partner, works with manufacturers to pick the right first project, connect the systems you already run and put AI agents and tools into daily use, with people approving what goes out.

Assessments and consultations are provided by Genvo. How our partnership works.