Use case · Supply chain & procurement

Autonomous mobile robots & intralogistics

Self-navigating robots move materials between receiving, storage, lines and shipping without fixed tracks or dedicated drivers.

Maturity
Proven, scaling
Complexity
Medium (our assessment)
Department
Supply chain & procurement
Technology
Robotics & autonomy, Computer vision, Optimization & planning, Machine learning
Solves
Hard-to-fill roles, Safety incidents, Throughput bottlenecks, Excess inventory

What it is

Autonomous mobile robots (AMRs) carry carts, totes, pallets and racks around a facility, using lidar, cameras and onboard maps to navigate and avoid people and obstacles. Unlike older automated guided vehicles that follow magnetic tape or wires, AMRs plan their own routes and adapt when an aisle is blocked. Fleet software assigns missions, manages traffic and connects robots to MES or warehouse systems so moves are triggered by real demand.

It matters because moving material is a large share of non-value-added labor in many plants, and forklift traffic is a major source of serious injuries. Line-side replenishment depends on people being available at the right time, so a missing driver can starve a line. AMRs take over repetitive transport routes, keep deliveries steady across shifts and reduce the number of forklifts mixing with pedestrians.

How it works

  1. Map the material flows

    Study which routes, loads and frequencies make up most internal transport, such as warehouse to line-side, between process steps, or finished goods to shipping.

  2. Prepare the facility

    The robots map the facility. Aisles, floor conditions, doors, elevators and pick-up and drop-off stations are adapted where needed, and safety zones are defined.

  3. Integrate missions

    Fleet software connects to MES, WMS or call buttons so robots are dispatched by actual consumption, such as a bin emptying or a work order starting.

  4. Manage the fleet

    Fleet management assigns tasks to the nearest available robot, sequences charging and coordinates traffic at intersections and shared paths.

  5. Expand by route

    After the first routes run reliably, more routes and robot types are added, with throughput and interventions tracked for each.

Benefits

Drivers freed for skilled work

Repetitive transport routes move to robots, so scarce workers spend time on tasks that need judgment.

Fewer forklift and pedestrian conflicts

Replacing some forklift routes with slower, sensor-equipped robots reduces exposure to one of the most serious hazards in a plant.

Steady line-side supply

Consumption-triggered deliveries keep lines supplied consistently across shifts, independent of who is available to drive.

Flexible layout

Because routes are software-defined, layouts can change without ripping up tape or conveyors.

Data & prerequisites

Data you will need

  • Facility layout drawings and route maps
  • Material movement volumes, loads and frequencies by route
  • Work order and inventory events from MES or WMS
  • Load dimensions and weights
  • Robot telemetry such as location, battery and task status
  • Safety incident history related to material handling

Before you start

  • Reasonably flat, clean floors and aisles wide enough for robots and people
  • Wi-Fi coverage across all routes
  • Defined pick-up and drop-off points and load standards such as carts or totes
  • Integration capacity to connect the fleet with MES or WMS

Software for autonomous mobile robots & intralogistics

Companies whose published products address this use case. Listings are editorial, not paid. Filter the directory.

Locus Robotics

AI robotics & autonomy · Wilmington, MA

Locus Robotics makes autonomous mobile robots and the LocusONE orchestration software for warehouse fulfillment, in both person-to-goods and fully autonomous robot-to-goods setups. Most of its customers are 3PLs and...

Autonomous mobile robots & intralogistics
Founded 2015

Vecna Robotics

AI robotics & autonomy · Waltham, MA

Vecna Robotics makes autonomous mobile robots for material handling in warehouses and factories. Its robots handle case picking, putaway, cross-docking, line-side delivery and end-of-line pallet moves, and run on the...

Autonomous mobile robots & intralogistics
Founded 2018

Supporting research

AI Adoption in America: Who, What, and Where

National Bureau of Economic Research (NBER Working Paper 31788) · Working paper · 2023

McElheran, Li, Brynjolfsson, Kroff, Dinlersoz, Foster and Zolas use the Census Bureau's 2018 Annual Business Survey of about 850,000 U.S. firms to measure early use of five AI-related technologies: automated guided vehicles, machine learning, machine vision, natural language processing and voice recognition. They show who adopted, where, and alongside which other technologies. The same study was later published in the Journal of Economics & Management Strategy (2024) and as Census working paper CES-WP-23-48.

Research institute

Common pitfalls

  • Automating routes with too little volume to justify the robots
  • Non-standard loads and carts that robots cannot handle reliably
  • Cluttered aisles and blocked drop-off points that cause frequent robot stops
  • Treating robots as standalone devices instead of integrating them with the systems that know what needs to move

Questions to ask vendors

  1. What payloads, load types and floor conditions can your robots handle?
  2. How does your fleet software integrate with our MES, WMS or ERP?
  3. How do the robots handle doors, elevators, blocked aisles and mixed traffic with forklifts?
  4. What safety standards do your robots meet, and who performs the site risk assessment?
  5. Can your fleet manager coordinate robots from other manufacturers?

What to measure

  • Material moves completed per shift
  • Line-side material shortages
  • Robot interventions per shift
  • Forklift hours and forklift-related incidents
  • Labor hours spent on internal transport

Funding that can help

Frequently asked questions

What is the difference between an AMR and an AGV?

Automated guided vehicles follow fixed paths such as magnetic tape, wires or reflectors and stop when something blocks the path. Autonomous mobile robots use onboard sensors and maps to plan their own routes and navigate around obstacles. AMRs are easier to reconfigure, while AGVs remain common for heavy, highly repetitive moves on fixed routes.

Can autonomous mobile robots work safely around people?

Yes, AMRs are designed to operate in shared spaces, slowing or stopping when people or obstacles enter their safety fields. They must meet applicable industrial mobile robot safety standards, and each site still needs a risk assessment covering routes, speeds and intersections. Separating robot routes from forklift traffic where possible further reduces risk.

Which tasks should manufacturers automate first with AMRs?

Good first routes are high-frequency, repetitive moves with standardized loads, such as delivering components from storage to line-side or moving finished goods to shipping. Routes that currently tie up skilled workers or forklifts in busy pedestrian areas are especially strong candidates.

Related use cases

Operations & production

AI robotic picking & manipulation

Vision-guided robots pick, place, sort and handle varied or unstructured items that fixed-program automation cannot.

Robotics & autonomyComputer visionMachine learning
Proven, scaling2 software companies

Safety, health & sustainability

Worker safety & EHS vision analytics

Computer vision on existing cameras spots unsafe conditions such as PPE gaps, pedestrian and forklift conflicts and zone intrusions.

Computer visionMachine learningGenerative AI & LLMs
Proven, scaling4 software companies

Supply chain & procurement

Inventory & materials optimization

Set safety stock, reorder points and stocking policies from real demand and supply variability instead of rules of thumb.

Optimization & planningMachine learning
Established4 software companies

Operations & production

Production planning & scheduling

Optimization engines build feasible schedules that respect real constraints and re-plan quickly when orders, machines or materials change.

Optimization & planningMachine learning
Established4 software companies

Put AI to work

Find the AI opportunities hiding in your plant.

Genvo, our implementation partner, works with manufacturers to pick the right first project, connect the systems you already run and put AI agents and tools into daily use, with people approving what goes out.

Assessments and consultations are provided by Genvo. How our partnership works.