Use case · Operations & production

Process & yield optimization

Models recommend or automatically adjust process setpoints to keep quality on target while improving yield, throughput and energy use.

Maturity
Proven, scaling
Complexity
High (our assessment)
Department
Operations & production
Technology
Machine learning, Optimization & planning, Industrial IoT & edge
Solves
Scrap & rework, Throughput bottlenecks, Energy costs, Retiring expertise

What it is

Process optimization uses models of how a process responds to its inputs to recommend better setpoints for temperatures, feed rates, pressures, line speeds and additive doses. In advisory mode the system suggests adjustments for operators to accept or reject; in closed-loop mode it writes setpoints to the control system within limits that engineers define.

It matters because most continuous and batch processes run on setpoints chosen conservatively years ago and adjusted by feel. Raw materials, ambient conditions and equipment wear keep changing, so the best settings move too. A model that accounts for current conditions can hold quality closer to target with less give-away, and it captures the know-how of the best operators so every shift runs closer to their standard.

How it works

  1. Set the objective and limits

    Engineering defines what to optimize, such as yield, throughput, energy or a weighted combination, and the hard limits on quality, safety and equipment that must never be crossed.

  2. Model the process

    Machine learning models are trained on historian data to predict how quality and output respond to setpoints under different raw material and ambient conditions, sometimes combined with first-principles models.

  3. Recommend setpoints

    An optimizer searches for the combination of settings that best meets the objective for current conditions and presents recommendations to operators with the expected effect.

  4. Build trust in advisory mode

    Operators follow, adjust or reject recommendations, and each decision is logged. Comparing outcomes when recommendations were followed against when they were not shows whether the model is helping.

  5. Move to closed loop where justified

    Once trusted, selected loops can be automated so the system writes setpoints within tight bounds, with operators able to take back manual control at any time.

Benefits

Less quality give-away

Running closer to the specification limit, instead of well inside it for safety margin, reduces overuse of expensive ingredients, coatings or energy while still meeting spec.

Adapts to changing inputs

Recommendations respond to raw material variation and ambient conditions that fixed recipes ignore, which keeps output steadier between lots and seasons.

Shift-to-shift consistency

Every crew gets the same model-based guidance, so performance depends less on which operator happens to be on the board.

Captures expert know-how

The relationships experienced operators learned over years are encoded in the model and stay with the plant when those people retire.

Data & prerequisites

Data you will need

  • Historian time-series for setpoints, process variables and controller outputs
  • Quality results from the lab or inline analyzers
  • Raw material properties from certificates or incoming testing
  • Energy and utility consumption by unit or line
  • Operating constraints, alarm limits and equipment capabilities
  • Operator logs and records of manual interventions

Before you start

  • A historian with clean, time-aligned process and quality data covering a range of operating conditions
  • A stable base control layer, since optimization cannot fix loops that oscillate or run in manual
  • Process engineers who own the objective, the limits and the management-of-change process
  • Operator involvement from the start, since they decide whether recommendations get used

Software for process & yield optimization

Companies whose published products address this use case. Listings are editorial, not paid. Filter the directory.

Arch Systems

Process analytics & optimization · Palo Alto, CA

Arch Systems collects data from machines, MES, ERP and SCADA into a real-time model of factory operations, aimed largely at electronics and other discrete manufacturers. Its software provides role-based KPIs and...

Machine monitoring & OEE analyticsRoot-cause analysis for quality & yieldProcess & yield optimization
Founded 2015

Aspen Technology (AspenTech)

Process analytics & optimization · Bedford, MA

AspenTech makes process simulation, advanced process control, asset performance management, planning and scheduling, and industrial data software for process industries such as chemicals, refining, pharmaceuticals, and...

Process & yield optimizationPredictive maintenanceFactory & process digital twins
Founded 1981

Braincube

Process analytics & optimization · Issoire, France

Braincube is a French industrial AI company whose IIoT platform collects and contextualizes production data and uses it for real-time process optimization across lines and shifts. It builds a process digital twin from...

Process & yield optimizationFactory & process digital twinsRoot-cause analysis for quality & yield
Founded 2007

Fero Labs

Process analytics & optimization · New York, NY

Fero Labs makes machine learning software that process engineers use to find root causes of production problems, simulate setpoint changes and run optimization on live production. It focuses on heavy process industries...

Root-cause analysis for quality & yieldProcess & yield optimizationQuality prediction & virtual metrology
Founded 2015

Oden Technologies

Process analytics & optimization · New York, NY

Oden Technologies provides AI software that collects and cleans production line data and gives frontline operators recommendations to improve output, quality and cost. It adds factory analytics and AI agents for...

Process & yield optimizationMachine monitoring & OEE analyticsRoot-cause analysis for quality & yield
Founded 2014

PhysicsX

Engineering, simulation & CAM AI · London, United Kingdom

PhysicsX builds a platform for training and deploying physics AI models that stand in for slow engineering simulations, so engineers can predict performance, explore designs and optimize them much faster. It serves...

Generative design & engineering simulationProcess & yield optimization
Founded 2019

Sight Machine

Process analytics & optimization · San Francisco, CA

Sight Machine builds a manufacturing data platform that maps a plant's machines and lines into a structured model and converts raw control, historian, MES and ERP data into production events and KPIs. AI agents then...

Machine monitoring & OEE analyticsRoot-cause analysis for quality & yieldProcess & yield optimization
Founded 2011

Real-world examples

Each example is labeled by who reported the result. How we grade evidence.

Supporting research

Working Smarter: How Manufacturers Are Using Artificial Intelligence

National Association of Manufacturers · White paper · 2024

The NAM's first report on AI in manufacturing explains how manufacturers act as both developers and deployers of AI. It draws on 2023 Manufacturing Leadership Council surveys and case studies including Johnson & Johnson, Schneider Electric and Hitachi, and ends with policy recommendations for lawmakers.

Industry association

2025 State of Smart Manufacturing Report

Rockwell Automation · Survey · 2025

Rockwell Automation's 10th annual global survey, produced with Sapio Research, of 1,560 manufacturing decision-makers in 17 countries on smart manufacturing investment, AI use, workforce, cybersecurity and sustainability. As a vendor report, it frames AI as a response to labor shortages, quality pressure and external risk.

Vendor

Artificial Intelligence in Advanced Manufacturing: Current Status and Future Outlook

ASME, Journal of Manufacturing Science and Engineering · Peer-reviewed paper · 2020

Arinez, Chang, Gao, Xu and Zhang review applications of AI and machine learning to representative manufacturing problems, organized by the hierarchy used in plants from the overall system down to material process streams. Topics range from throughput and quality to human-robot collaboration, process monitoring, diagnosis and prognosis, and materials process modeling and control.

Academic (peer-reviewed)

A review of artificial intelligence applications in manufacturing operations

Journal of Advanced Manufacturing and Processing (AIChE/Wiley); record via U.S. DOE OSTI · Peer-reviewed paper · 2023

Plathottam, Rzonca, Lakhnori and Iloeje review current developments, challenges and future directions for AI and machine learning in manufacturing operations. The paper aims to help practitioners choose suitable AI/ML technologies and to identify research areas with high potential returns.

Academic (peer-reviewed)

Machine Learning in Manufacturing towards Industry 4.0: From 'For Now' to 'Four-Know'

Applied Sciences (MDPI); repository copy at KITopen (Karlsruhe Institute of Technology) · Peer-reviewed paper · 2023

Chen and co-authors propose a roadmap for developing ML applications in manufacturing, from ideation to deployment, based on the published literature. They frame ML tasks along 'Four-Know' (what, why, when, how) and 'Four-Level' (product, process, machine, system) dimensions and summarize supervised, semi-supervised, unsupervised and reinforcement learning methods with typical applications.

Academic (peer-reviewed)

Common pitfalls

  • Optimizing on historical data that never explored the operating region the model now recommends
  • Recommendations that conflict with operator experience and come with no explanation, so they get ignored
  • Going straight to closed-loop control without an advisory period and clear fallback procedures
  • Objectives that do not reflect real economics, such as maximizing throughput when the downstream bottleneck cannot absorb it

Questions to ask vendors

  1. How does your model behave when recommending setpoints outside the range seen in our historical data?
  2. How do operators see why a recommendation was made and what effect is expected?
  3. What safety interlocks and limits prevent closed-loop writes from taking the process somewhere unsafe?
  4. How do you measure benefit, and how do you separate your effect from normal process variation?
  5. What happens when we change equipment, recipes or raw material suppliers?

What to measure

  • Yield or first pass yield
  • Quality give-away against specification target
  • Throughput at constant quality
  • Energy or raw material use per unit
  • Recommendation acceptance rate by operators

Funding that can help

Frequently asked questions

What is closed-loop AI process optimization?

Closed-loop optimization means the AI system writes setpoints directly to the control system instead of only recommending them to operators. It sits above the existing control layer, adjusting targets within limits set by engineers, while the base controllers still handle fast regulation. Most plants run in advisory mode first and automate only once the model has earned trust.

How is AI optimization different from advanced process control?

Advanced process control typically uses models identified from step tests to hold a process at target in real time. AI optimization often uses machine learning on historical data to handle nonlinear behavior and many interacting variables, and is frequently used to choose the targets that advanced control then holds. The two are complementary and many plants run them together.

Which processes benefit most from AI setpoint optimization?

Processes with many interacting variables, variable raw materials and an expensive trade-off between quality, yield and energy see the most benefit. Common examples are extrusion, molding, drying, kilns and furnaces, distillation, fermentation and paper machines. Simple processes with few settings usually do not need it.

Related use cases

Quality

Quality prediction & virtual metrology

Predict product quality from live process data so problems are caught before parts are measured, tested or shipped.

Machine learningIndustrial IoT & edge
Proven, scaling2 software companies

Operations & production

Energy & utilities optimization

Measure and model energy use by line and utility system, then cut waste through better scheduling, setpoints and load management.

Machine learningOptimization & planningIndustrial IoT & edge
Proven, scaling0 software companies

Engineering & R&D

Factory & process digital twins

Virtual models of lines, processes or whole plants, fed with real data, to test changes and predict performance before touching the floor.

Digital twins & simulationMachine learningIndustrial IoT & edge
Emerging4 software companies

Quality

Root-cause analysis for quality & yield

Machine learning sifts process, material and equipment data to narrow down which factors are actually driving defects and yield loss.

Machine learningGenerative AI & LLMs
Proven, scaling8 software companies

Put AI to work

Find the AI opportunities hiding in your plant.

Genvo, our implementation partner, works with manufacturers to pick the right first project, connect the systems you already run and put AI agents and tools into daily use, with people approving what goes out.

Assessments and consultations are provided by Genvo. How our partnership works.