Use case · Operations & production

Machine monitoring & OEE analytics

Automatically capture machine states, downtime reasons and output to measure OEE accurately and target the biggest losses.

Maturity
Established
Complexity
Low (our assessment)
Department
Operations & production
Technology
Industrial IoT & edge, Machine learning
Solves
Throughput bottlenecks, Unplanned downtime, Hard-to-fill roles

What it is

Machine monitoring connects to machine controllers, PLCs or simple sensors to record when equipment is running, idle, in setup or down, along with part counts and cycle times. Analytics turn those signals into overall equipment effectiveness (OEE) and loss breakdowns, and AI features help categorize downtime, detect slow cycles and surface patterns across machines and shifts.

It matters because manually recorded production data is incomplete and optimistic. Short stops go unreported, downtime reasons get coded as other, and utilization looks higher on paper than it is. Automatic capture shows where capacity is actually being lost, which is often the cheapest capacity a plant can find before buying new equipment.

How it works

  1. Connect the machines

    Modern CNCs and PLCs are connected through standard protocols such as MTConnect or OPC UA. Older machines get simple current sensors or I/O adapters that detect run state and cycles.

  2. Capture states and counts

    The system records running, idle, setup and alarm states with timestamps, plus part counts and cycle times, without operator effort.

  3. Add reasons at the machine

    Operators select downtime reasons on a tablet or terminal when a stop occurs. Some systems suggest the likely reason from alarm codes and past patterns to make coding faster and more consistent.

  4. Analyze losses

    OEE is broken down into availability, performance and quality losses by machine, part, shift and reason, and ranked so the biggest losses stand out.

  5. Run improvement routines

    Live dashboards at the machine and daily loss reviews drive targeted actions, such as setup reduction or fixing a recurring alarm, and the data shows whether they worked.

Benefits

True picture of capacity

Automatic state capture includes short stops and slow cycles that manual logs miss, so decisions about overtime and new equipment rest on real utilization.

Losses ranked by size

Pareto views of downtime reasons by machine and shift point improvement teams at the losses that matter most.

Faster response on the floor

Live status and alerts let supervisors and maintenance see a stopped machine immediately rather than at the next walk-through.

Accurate standards

Measured cycle and setup times feed better quoting, scheduling and costing.

Data & prerequisites

Data you will need

  • Machine run, idle, setup and alarm states from controllers, PLCs or sensors
  • Part counts and cycle times
  • Alarm and fault codes
  • Downtime reason entries from operators
  • Job, part number and operator from the ERP or MES
  • Scrap counts by machine and job

Before you start

  • Network connectivity to the shop floor, with IT and OT agreement on how machines connect
  • A clear, short list of downtime reason codes that operators will actually use
  • Supervisors who review the data daily and act on it
  • Agreement on how OEE is calculated, including planned downtime

Software for machine monitoring & oee analytics

Companies whose published products address this use case. Listings are editorial, not paid. Filter the directory.

Arch Systems

Process analytics & optimization · Palo Alto, CA

Arch Systems collects data from machines, MES, ERP and SCADA into a real-time model of factory operations, aimed largely at electronics and other discrete manufacturers. Its software provides role-based KPIs and...

Machine monitoring & OEE analyticsRoot-cause analysis for quality & yieldProcess & yield optimization
Founded 2015

Augury

Asset performance & predictive maintenance · New York, NY

Augury sells machine health monitoring for manufacturing plants. It installs vibration and other IoT sensors on rotating equipment such as motors, pumps, compressors and gearboxes, and uses AI to diagnose faults and...

Predictive maintenanceMachine monitoring & OEE analytics
Founded 2011

Litmus

Industrial data platforms & IIoT · Santa Clara, CA

Litmus provides an industrial edge data platform that connects to PLCs, SCADA, historians and MES, standardizes the data and sends it to cloud and analytics tools. It includes built-in KPIs, anomaly detection and local...

Machine monitoring & OEE analyticsProcess anomaly detection
Founded 2014

MachineMetrics

Manufacturing operations & frontline platforms · Northampton, MA

MachineMetrics connects CNC and other production machines to collect utilization, downtime and cycle-time data for discrete manufacturers and job shops. Its MaximaOS platform layers scheduling, work orders and OEE...

Machine monitoring & OEE analyticsProduction planning & schedulingProcess anomaly detection

Oden Technologies

Process analytics & optimization · New York, NY

Oden Technologies provides AI software that collects and cleans production line data and gives frontline operators recommendations to improve output, quality and cost. It adds factory analytics and AI agents for...

Process & yield optimizationMachine monitoring & OEE analyticsRoot-cause analysis for quality & yield
Founded 2014

Sight Machine

Process analytics & optimization · San Francisco, CA

Sight Machine builds a manufacturing data platform that maps a plant's machines and lines into a structured model and converts raw control, historian, MES and ERP data into production events and KPIs. AI agents then...

Machine monitoring & OEE analyticsRoot-cause analysis for quality & yieldProcess & yield optimization
Founded 2011

Toolpath

Engineering, simulation & CAM AI · Atlanta, GA

Toolpath is a U.S. startup whose platform analyzes CNC part models to produce DFM reviews, cycle-time and cost estimates, and AI-generated CAM programs for milling. It targets machine shop owners, estimators and CNC...

AI-assisted CNC / CAM programmingAI quoting & cost estimatingMachine monitoring & OEE analytics

Tulip

Manufacturing operations & frontline platforms · Somerville, MA

Tulip, a 2014 MIT Media Lab spinout, provides a composable frontline operations platform on which manufacturers build their own apps for work instructions, electronic batch and device history records, inspections and...

Manual assembly analytics & operator guidanceGenAI knowledge assistants & copilotsDocument automation for supplier, compliance & QMS
Founded 2014

Supporting research

Artificial Intelligence: Key Consideration and Effective Implementation Strategies

NIST Manufacturing Extension Partnership (MEP) · White paper · 2025

A NIST MEP white paper for small and medium-sized manufacturers on Industrial AI (IAI): whether they need it, how to tell if it is working, and whether it is worth the cost and risk. It draws on NIST's Industrial AI Management and Metrology team and the NIST AI Risk Management Framework, and stresses evaluating models in the context of the business goal rather than headline accuracy.

Government

Common pitfalls

  • Long or vague reason code lists, so operators pick the first option or other
  • Using OEE to blame operators, which leads to gaming the data
  • Collecting data without a daily routine to act on it
  • Comparing OEE across plants calculated with different definitions

Questions to ask vendors

  1. How do you connect to our oldest machines that have no network interface?
  2. Which protocols and controller brands do you support natively?
  3. How do operators enter downtime reasons, and how do you keep reason data consistent?
  4. Can we export raw state and count data to our own systems?
  5. What does installation require from our IT and controls teams per machine?

What to measure

  • Overall equipment effectiveness (OEE)
  • Availability, performance and quality rates
  • Unplanned downtime by reason
  • Average setup or changeover time
  • Share of downtime with an assigned reason

Funding that can help

Frequently asked questions

What is OEE and how is it calculated?

Overall equipment effectiveness measures how much of planned production time is truly productive. It is calculated as availability multiplied by performance multiplied by quality, where availability reflects downtime, performance reflects slow cycles and short stops, and quality reflects scrap and rework. Automated machine monitoring makes these components accurate instead of estimated.

Can older machines be connected to a machine monitoring system?

Yes. Machines without network controllers can be monitored with current sensors on the spindle or main motor, stack light sensors, or digital I/O adapters that detect run state and cycles. These provide state and count data even when detailed controller data is unavailable.

How is machine monitoring different from an MES?

Machine monitoring focuses on capturing equipment state, output and downtime automatically. A manufacturing execution system is broader, managing work orders, routings, material tracking, quality records and genealogy. Many plants start with machine monitoring for quick visibility and add MES functions later.

Related use cases

Maintenance & reliability

Predictive maintenance

Use sensor and maintenance history to spot developing equipment failures early and schedule repairs before they stop the line.

Machine learningIndustrial IoT & edge
Established7 software companies

Operations & production

Production planning & scheduling

Optimization engines build feasible schedules that respect real constraints and re-plan quickly when orders, machines or materials change.

Optimization & planningMachine learning
Established4 software companies

Operations & production

Process anomaly detection

Models learn normal process behavior across many sensors and flag unusual patterns before they become quality, safety or equipment problems.

Machine learningIndustrial IoT & edge
Proven, scaling7 software companies

Operations & production

Energy & utilities optimization

Measure and model energy use by line and utility system, then cut waste through better scheduling, setpoints and load management.

Machine learningOptimization & planningIndustrial IoT & edge
Proven, scaling0 software companies

Put AI to work

Find the AI opportunities hiding in your plant.

Genvo, our implementation partner, works with manufacturers to pick the right first project, connect the systems you already run and put AI agents and tools into daily use, with people approving what goes out.

Assessments and consultations are provided by Genvo. How our partnership works.