Use case · Maintenance & reliability

Predictive maintenance

Use sensor and maintenance history to spot developing equipment failures early and schedule repairs before they stop the line.

Maturity
Established
Complexity
Medium (our assessment)
Department
Maintenance & reliability
Technology
Machine learning, Industrial IoT & edge
Solves
Unplanned downtime, Throughput bottlenecks, Excess inventory, Safety incidents

What it is

Predictive maintenance uses data from the equipment itself, such as vibration, temperature, current draw, oil condition and acoustic signals, to estimate when a component is degrading and how much useful life it has left. Models learn what normal looks like for each asset and flag patterns that historically come before a failure, so the maintenance team can act on condition rather than on the calendar or on a breakdown.

It matters because most plants still run a mix of reactive repairs and time-based preventive maintenance. Reactive work is expensive and disruptive, and fixed-interval PMs replace parts that still had life in them while missing failures that arrive early. Shifting critical assets to condition-based work lets planners line up parts, labor and downtime windows on their own terms.

How it works

  1. Pick the assets that hurt most

    Start with a criticality review: which machines stop the plant, have long repair times or expensive spares, and fail in ways that give physical warning. Bottleneck motors, gearboxes, pumps, compressors and spindles are typical first candidates.

  2. Instrument and collect

    Add or reuse vibration, temperature, current and pressure sensors, and pull existing PLC and historian tags. Sampling rate matters: bearing faults need high-frequency vibration data, while slow thermal drift can be caught from one-minute averages.

  3. Learn normal behavior

    Models build a baseline for each asset across its operating modes, so a change in load or product does not look like a fault. Where failure history exists, supervised models learn the specific signatures that preceded past breakdowns.

  4. Alert with context

    When readings drift from the baseline, the system raises an alert that names the likely failure mode, the evidence behind it and a rough window for action, ideally as a work request in the CMMS rather than a separate dashboard.

  5. Close the loop

    Technicians record what they actually found when they open the machine. That feedback confirms or corrects the model, which is what makes alerts more trustworthy over time.

Benefits

Repairs on your schedule

Bearing wear, misalignment and imbalance show up in vibration spectra well before heat or noise, which gives planners time to schedule the fix into a changeover or weekend instead of losing a shift.

Fewer unnecessary PMs

Parts are replaced when their condition says so rather than on a fixed interval, so good components are not thrown away and technician hours go to the work that actually needs doing.

Leaner spares

Earlier warning means more failures can be covered by ordering parts when an alert fires, rather than stocking every critical spare just in case.

Less secondary damage

Catching a failing bearing early prevents it from taking out a shaft, housing or coupling, which turns a component swap into a minor job instead of a rebuild.

Data & prerequisites

Data you will need

  • Vibration and temperature from existing or new condition-monitoring sensors
  • Motor current, pressure and flow tags from PLCs and the plant historian
  • Work order and failure history from the CMMS, with failure codes
  • Asset hierarchy and nameplate data (speeds, bearing types, gear ratios)
  • Operating context such as product, load and run state
  • Oil analysis and thermography results where available

Before you start

  • A criticality ranking of assets so effort goes where downtime costs the most
  • Reliable network path from sensors and controllers to where the models run
  • A CMMS in active use, so alerts can become work orders and findings get recorded
  • Maintenance leaders willing to change PM intervals based on evidence

Software for predictive maintenance

Companies whose published products address this use case. Listings are editorial, not paid. Filter the directory.

Aspen Technology (AspenTech)

Process analytics & optimization · Bedford, MA

AspenTech makes process simulation, advanced process control, asset performance management, planning and scheduling, and industrial data software for process industries such as chemicals, refining, pharmaceuticals, and...

Process & yield optimizationPredictive maintenanceFactory & process digital twins
Founded 1981

Augury

Asset performance & predictive maintenance · New York, NY

Augury sells machine health monitoring for manufacturing plants. It installs vibration and other IoT sensors on rotating equipment such as motors, pumps, compressors and gearboxes, and uses AI to diagnose faults and...

Predictive maintenanceMachine monitoring & OEE analytics
Founded 2011

Avathon

Asset performance & predictive maintenance · Pleasanton, CA

Avathon, formerly SparkCognition, offers an industrial AI platform that combines an operational knowledge graph with AI agents for asset-heavy operations. For manufacturers it covers predictive maintenance through...

Predictive maintenanceProcess anomaly detectionVisual quality inspection
Founded 2013

Eigen Innovations

Vision inspection & quality AI · Fredericton, Canada

Eigen Innovations combines thermal and optical imaging with AI to inspect parts and monitor heat-driven processes such as plastic welding, molding, adhesive application and furnace operation. Manufacturers use it for...

Visual quality inspectionQuality prediction & virtual metrologyPredictive maintenance
Founded 2012

Falkonry

Asset performance & predictive maintenance · Cupertino, CA

Falkonry makes time-series AI software that ingests sensor, PLC, SCADA and DCS data and automatically detects anomalies and recurring patterns without requiring in-house data scientists. It is aimed at plant reliability...

Process anomaly detectionPredictive maintenance
Founded 2012

Rockwell Automation

Manufacturing operations & frontline platforms · Milwaukee, WI

Rockwell Automation is a U.S. industrial automation company whose software adds AI across engineering, operations and maintenance. Examples include a generative AI copilot for PLC design in FactoryTalk Design Studio,...

Copilots for PLC & automation engineeringPredictive maintenanceProcess anomaly detection
Founded 1903

Siemens

Industrial copilots & AI agents · Munich, Germany

Siemens, the German industrial automation and software company, sells a family of industrial AI tools under Siemens Xcelerator. They include the generative-AI Industrial Copilot for automation engineering in TIA Portal,...

Copilots for PLC & automation engineeringGenAI knowledge assistants & copilotsPredictive maintenance
Founded 1847

Real-world examples

Each example is labeled by who reported the result. How we grade evidence.

Supporting research

Working Smarter: How Manufacturers Are Using Artificial Intelligence

National Association of Manufacturers · White paper · 2024

The NAM's first report on AI in manufacturing explains how manufacturers act as both developers and deployers of AI. It draws on 2023 Manufacturing Leadership Council surveys and case studies including Johnson & Johnson, Schneider Electric and Hitachi, and ends with policy recommendations for lawmakers.

Industry association

Artificial Intelligence: Key Consideration and Effective Implementation Strategies

NIST Manufacturing Extension Partnership (MEP) · White paper · 2025

A NIST MEP white paper for small and medium-sized manufacturers on Industrial AI (IAI): whether they need it, how to tell if it is working, and whether it is worth the cost and risk. It draws on NIST's Industrial AI Management and Metrology team and the NIST AI Risk Management Framework, and stresses evaluating models in the context of the business goal rather than headline accuracy.

Government

The Rise of Artificial Intelligence (AI) in U.S. Manufacturing

NIST Manufacturing Extension Partnership (MEP) · Report · 2025

A NIST MEP infographic summarizing AI adoption, barriers, core technologies and use cases in U.S. manufacturing, with MEP Center case examples (GaMEP and CJB Industries, NY MEP and zBeats, Ohio MEP and Magellan Aerospace). Its adoption and investment figures are compiled from Manufacturing Leadership Council surveys cited in its footnotes.

Government

Artificial Intelligence in Advanced Manufacturing: Current Status and Future Outlook

ASME, Journal of Manufacturing Science and Engineering · Peer-reviewed paper · 2020

Arinez, Chang, Gao, Xu and Zhang review applications of AI and machine learning to representative manufacturing problems, organized by the hierarchy used in plants from the overall system down to material process streams. Topics range from throughput and quality to human-robot collaboration, process monitoring, diagnosis and prognosis, and materials process modeling and control.

Academic (peer-reviewed)

A review of artificial intelligence applications in manufacturing operations

Journal of Advanced Manufacturing and Processing (AIChE/Wiley); record via U.S. DOE OSTI · Peer-reviewed paper · 2023

Plathottam, Rzonca, Lakhnori and Iloeje review current developments, challenges and future directions for AI and machine learning in manufacturing operations. The paper aims to help practitioners choose suitable AI/ML technologies and to identify research areas with high potential returns.

Academic (peer-reviewed)

Machine Learning in Predictive Maintenance towards Sustainable Smart Manufacturing in Industry 4.0

Sustainability (MDPI); repository copy at Eastern Mediterranean University · Peer-reviewed paper · 2020

Cinar, Abdussalam Nuhu, Zeeshan, Korhan, Asmael and Safaei review machine learning techniques applied to predictive maintenance for smart manufacturing. They classify studies by ML algorithm and category, machinery and equipment, data-acquisition devices, and data type and size.

Academic (peer-reviewed)

Common pitfalls

  • Instrumenting everything at once and drowning the team in alerts nobody has time to triage
  • Poor or missing failure codes in the CMMS, which leaves models with nothing to learn from
  • Treating alerts as a separate dashboard instead of routing them into the existing work order process
  • Ignoring operating context, so changes in product or speed trigger false alarms and the team stops trusting the system

Questions to ask vendors

  1. Which failure modes on our asset types does your system detect reliably, and which does it not?
  2. How does the model handle variable speed, load and product changes without generating false alarms?
  3. What sensor sampling rates and mounting do you require, and can you use sensors we already own?
  4. How do alerts reach our CMMS, and how do technician findings flow back to improve the model?
  5. How long does a new asset need to run before its baseline is trustworthy, and what does that period cost us?

What to measure

  • Mean time between failures (MTBF) on monitored assets
  • Unplanned downtime hours on monitored assets
  • Ratio of planned to unplanned maintenance work
  • Alert precision (share of alerts confirmed as real issues)
  • Maintenance cost per unit produced

Funding that can help

Frequently asked questions

What is the difference between preventive and predictive maintenance?

Preventive maintenance services equipment on a fixed schedule, such as every so many hours or months, regardless of condition. Predictive maintenance uses sensor data to estimate the actual condition of a component and schedules work when the data shows degradation. Most plants use both, reserving predictive methods for critical assets where failures are costly and give measurable warning.

Do I need failure history to start predictive maintenance?

No. Anomaly detection models can learn normal behavior and flag deviations without any labeled failures. Failure history helps the system name the specific fault and estimate remaining life, so recording what technicians find on every alert is what improves results over time.

Which equipment is best suited to predictive maintenance?

Rotating equipment such as motors, pumps, fans, gearboxes, compressors and spindles is the most common starting point because bearing and alignment problems produce clear vibration signatures before failure. The best candidates are assets that stop production when they fail, have long repair or parts lead times, and show measurable symptoms in advance.

Related use cases

Operations & production

Machine monitoring & OEE analytics

Automatically capture machine states, downtime reasons and output to measure OEE accurately and target the biggest losses.

Industrial IoT & edgeMachine learning
Established8 software companies

Operations & production

Process anomaly detection

Models learn normal process behavior across many sensors and flag unusual patterns before they become quality, safety or equipment problems.

Machine learningIndustrial IoT & edge
Proven, scaling7 software companies

Maintenance & reliability

GenAI knowledge assistants & copilots

Chat-based assistants answer maintenance and frontline questions from manuals, work orders and procedures, with sources cited.

Generative AI & LLMs
Emerging9 software companies

Sales, quoting & service

Field service & aftermarket support

Use connected-equipment data and AI to diagnose customer machines remotely, plan service visits and sell the right parts and services.

Machine learningGenerative AI & LLMsIndustrial IoT & edge
Proven, scaling0 software companies

Put AI to work

Find the AI opportunities hiding in your plant.

Genvo, our implementation partner, works with manufacturers to pick the right first project, connect the systems you already run and put AI agents and tools into daily use, with people approving what goes out.

Assessments and consultations are provided by Genvo. How our partnership works.