Use case · IT / OT

OT network anomaly detection & cybersecurity

Passively map industrial networks and detect unusual traffic or commands that may signal attacks or misconfigurations on control systems.

Maturity
Established
Complexity
Medium (our assessment)
Department
IT / OT
Technology
Machine learning, Industrial IoT & edge
Solves
Cyber risk, Unplanned downtime, Compliance paperwork, Safety incidents

What it is

OT cybersecurity tools monitor the networks that connect PLCs, HMIs, drives, robots and engineering workstations. They listen passively to network traffic, decode industrial protocols and build an inventory of every device, its firmware and its normal communication patterns. Machine learning and rules then flag anomalies such as a new device appearing, an unexpected program download to a PLC, communication with an unknown external address or traffic patterns associated with known threats.

It matters because manufacturing is a frequent target of ransomware and other attacks, and control networks were often built for reliability rather than security. Many plants lack an accurate list of what is connected, so they cannot patch, segment or detect what they cannot see. Visibility and early detection help prevent outages, protect safety systems and meet customer and regulatory security requirements.

How it works

  1. Deploy passive sensors

    Sensors connect to mirrored ports on network switches and listen to traffic without sending commands to control equipment, which avoids disrupting operations.

  2. Build the asset inventory

    Protocol decoding identifies devices, models, firmware versions and communication paths, creating an inventory that is usually far more complete than existing spreadsheets.

  3. Assess vulnerabilities and exposure

    Devices are matched against known vulnerabilities, and unexpected connections, such as remote access paths and links between IT and OT, are identified.

  4. Learn normal and detect anomalies

    The system learns normal communication patterns and alerts on deviations such as new devices, configuration changes, unusual commands or known threat indicators.

  5. Respond with operations

    Alerts flow to the security team or SOC with OT context, and response plans agreed with operations define how to contain threats without causing unsafe process conditions.

Benefits

Know what is connected

An automatically maintained inventory of OT devices and firmware is the foundation for patching, segmentation and incident response.

Early warning of threats

Unusual commands, new remote connections or reconnaissance traffic can be detected before an attacker disrupts production.

Catches mistakes too

Unauthorized program changes, misconfigured devices and failing network equipment show up in the same monitoring, supporting reliability as well as security.

Evidence for compliance

Inventory, monitoring and incident records support customer security requirements and frameworks such as IEC 62443 and NIST guidance.

Data & prerequisites

Data you will need

  • Mirrored network traffic from OT switches
  • Network architecture diagrams and segmentation design
  • Existing asset inventories and engineering documentation
  • Firewall, remote access and VPN logs
  • Vulnerability advisories for industrial products
  • Change management records for control system programs

Before you start

  • Managed switches that support port mirroring at key network points
  • Agreement between IT, OT and operations on roles and response procedures
  • Staff or a service provider to triage alerts with OT context
  • A plan for acting on findings, including segmentation and remote access controls

Software for ot network anomaly detection & cybersecurity

Companies whose published products address this use case. Listings are editorial, not paid. Filter the directory.

Claroty

OT cybersecurity · New York, NY

Claroty sells cybersecurity software for cyber-physical systems, including industrial control systems and connected plant equipment. Its platform builds an inventory of OT assets, assesses exposure, monitors networks...

OT network anomaly detection & cybersecurity
Founded 2015

Dragos

OT cybersecurity · Hanover, MD

Dragos is an industrial cybersecurity company that sells OT security software alongside threat intelligence and incident response services. The Dragos Platform provides asset visibility, vulnerability management and...

OT network anomaly detection & cybersecurity
Founded 2016

Nozomi Networks

OT cybersecurity · San Francisco, CA

Nozomi Networks sells OT and IoT security software that discovers industrial assets, detects threats and flags vulnerabilities on plant networks. It collects data with network sensors, wireless sensors and endpoint...

OT network anomaly detection & cybersecurity
Founded 2013

Supporting research

2025 Smart Manufacturing and Operations Survey: Navigating challenges to implementation

Deloitte · Survey · 2025

Deloitte surveyed 600 executives at large manufacturers with headquarters or operations in the United States, from August to September 2024, on smart manufacturing investment, returns, technology adoption, talent and cybersecurity. It finds broad confidence in smart manufacturing, with AI adoption still moderate and human capital the least mature area.

Consultancy

2025 State of Smart Manufacturing Report

Rockwell Automation · Survey · 2025

Rockwell Automation's 10th annual global survey, produced with Sapio Research, of 1,560 manufacturing decision-makers in 17 countries on smart manufacturing investment, AI use, workforce, cybersecurity and sustainability. As a vendor report, it frames AI as a response to labor shortages, quality pressure and external risk.

Vendor

Behind the Firewall: Assessing Cyber Resilience in U.S. Manufacturing

MxD (Manufacturing x Digital) · Survey · 2024

MxD, the Manufacturing USA digital manufacturing and cybersecurity institute, worked with APCO Insight to survey senior cybersecurity decision-makers at U.S. manufacturers to set a baseline for cyber preparedness as plants connect more digital systems. Results are segmented by company size and by sector, including aerospace and defense, the defense industrial base and chemicals.

Research institute

Common pitfalls

  • Using active scanning tools on fragile control devices, which can crash them
  • Deploying detection without anyone assigned to respond to alerts
  • Response plans written by IT without operations input, risking unsafe shutdowns
  • Treating monitoring as a substitute for segmentation, secure remote access and backups

Questions to ask vendors

  1. Is your monitoring fully passive, and when do you use active queries on our devices?
  2. Which industrial protocols and controller families do you decode in depth?
  3. How do you separate real threats from normal engineering activity such as program changes?
  4. How does your platform integrate with our SOC, SIEM and IT security tools?
  5. What response guidance do you provide that accounts for process safety?

What to measure

  • Share of OT assets in a verified inventory
  • Critical vulnerabilities on exposed assets
  • Time to detect and respond to OT security alerts
  • Unauthorized changes to control system programs
  • Unmanaged remote access paths into OT networks

Funding that can help

Frequently asked questions

What is OT network monitoring?

OT network monitoring passively observes traffic on industrial control networks to identify connected devices and detect unusual activity. It decodes industrial protocols so it understands commands such as program downloads or setpoint changes. It gives security and operations teams visibility into control systems without interfering with production.

Why is OT cybersecurity different from IT security?

Control systems prioritize availability and safety, often run older equipment that cannot be patched or scanned easily, and use industrial protocols that IT tools do not understand. A response that is normal in IT, such as isolating a device, can stop production or create unsafe conditions in OT. OT security therefore needs specialized tools and close coordination with operations.

Is passive monitoring safe for PLCs and control systems?

Passive monitoring listens to a copy of network traffic and sends nothing to control devices, so it does not affect their operation. Some platforms also offer active queries for more detail, which should be used carefully and only on devices known to tolerate them. Starting with passive monitoring is the standard practice for production networks.

Related use cases

Operations & production

Process anomaly detection

Models learn normal process behavior across many sensors and flag unusual patterns before they become quality, safety or equipment problems.

Machine learningIndustrial IoT & edge
Proven, scaling7 software companies

Engineering & R&D

Copilots for PLC & automation engineering

Generative AI helps controls engineers write, explain, document and test PLC and automation code faster.

Generative AI & LLMsDigital twins & simulation
Emerging2 software companies

Operations & production

Machine monitoring & OEE analytics

Automatically capture machine states, downtime reasons and output to measure OEE accurately and target the biggest losses.

Industrial IoT & edgeMachine learning
Established8 software companies

Quality

Document automation for supplier, compliance & QMS

AI reads, checks and drafts the documents behind quality and compliance, from certificates and specs to deviations and audit records.

Generative AI & LLMsMachine learningComputer vision
Proven, scaling6 software companies

Put AI to work

Find the AI opportunities hiding in your plant.

Genvo, our implementation partner, works with manufacturers to pick the right first project, connect the systems you already run and put AI agents and tools into daily use, with people approving what goes out.

Assessments and consultations are provided by Genvo. How our partnership works.